喷射点胶阀 Jet Dispensing Valve

产品优势Product advantages

■ 0~7Bar低压操作Noil 0~7Bar low pressure operation

■ 耗材少、价格经济Noil consume material less, price economy

■ 小喷射量0.002微升Noil injection amount of 0.002 microliter

■ 非接触式、无针头设计Noil contact type without needle design

■ 大喷射速度 1000次/秒The injection speed is 1000 times per second

■ 高精度（体积误差1%以内）High accuracy (within 1% of volume error)

■ 压电式驱动器，可软体校正A piezoelectric actuator can be calibrated

■ 喷嘴可耐热，且温度分布均匀

The nozzles can be heat-resistant and evenly distributed

■ 采用快拆式喷嘴设计，可电子调整

The nozzles are designed with quick split nozzle and can be adjusted electronically

■ 1~2,000,000mPas粘稠度适用性广Noil 1~2 million mPas have wide applicability

微量喷射阀型号     MDS3200A Micro-injection valve type MDS3200A

适用介质：SMT 粘合剂（包含高硬度颗粒的导电胶），硅胶，底部填充胶等高粘度介质

Suitable medium : SMT adhesive (including conductive adhesive with high hardness particles), silica gel, bottom filling glue, high viscosity medium

小喷射量 2nl（根据液体介质有所不同）

Small jet amount of 2nl (depending on the liquid medium)

粘度适用范围：0-200，000mPas Viscosity applicable range 0-200,000 mPas

顶杆类型 : 根据客户要求配备

The top bar type is equipped according to customer requirements

供液压力:0-8Bar Supply pressure 0-8 bar

大喷射速度 : 1000次/秒 Big jet velocity 1000 times/SEC

平均喷射速度：250次/秒 Average jet speed is 250 times per second

工作温度 10-50度：Work temperature: 10-50 degrees